Factors affecting the price of heat shrink packaging machine and daily maintenance

1. Quality

The price difference of heat shrink packaging machine is definitely inseparable from the quality of the shrink machine itself. The shrinking machine is not a fast-moving consumer product, and it will not be used after a few times. If it is properly maintained, it can be used for many years. Of course, a good-quality shrinking machine has a longer service life. If you want the shrinking machine to be of good quality, some components, cylinders and the like must be equipped with advanced, and the high-quality two-in-one shrinking machine is generally made of stainless steel instead of carbon steel.

Two, after-sales

The after-sales service of heat shrinking machine manufacturers are guaranteed for one year and maintained for life. In the customer's consultation, some manufacturers’ quotations may be ex-factory prices. The so-called ex-factory prices mean nothing, freight, after-sales, taxes, installation, etc., and some manufacturers’ quotations may include all of these. , So there will be a certain price difference.

3. Regional differences.

The price of the heat shrinkable machine is related to the local consumption level or regional differences. Generally speaking, prices in the south are also lower than in the north, and some places have higher consumption levels, such as Shanghai, where prices may be even higher. However, regions and after-sales are closely related. It may not be too convenient to buy after-sales in places with low prices. This depends on the user's choice.

4. On-site installation service.

Many of these shrink packaging machines are installed on-site for free. In fact, the main reason is that the price is different because of regional differences. You think our company is in Qingdao, if our customers are far away from us. , Our round-trip cost will be relatively high, so the price will definitely increase relatively.

5. Accessories.

Generally, the machine is repaired free of charge in one to two years. However, when the warranty period is exceeded, the corresponding maintenance cost will increase, and the cost of accessories will also increase. Therefore, customers should still ensure the good use of our machine when using it. Extended service life.

After understanding the price factor of the shrink packaging machine, its maintenance method is also very important. Many parts of the shrink packaging machine need regular maintenance during the use process. So which parts of the shrink packaging machine need regular maintenance?

1. We must check some mechanical parts regularly, such as once every half a month or once a month. The inspection parts include: worm gear, worm, bolts on the lubrication block, bearings and other movable parts to see if these parts are flexible in rotation and wear , If defects are found, they should be repaired in time and should not be used reluctantly.

Second, the heat shrinking machine should be used in a dry and clean room, and it should not be used in a place where the atmosphere contains acids and other gases that are corrosive to the body.

3. After the heat shrinking machine is used, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then install it, ready for the next use.

4. If the roller moves back and forth during work, please adjust the M10 screw on the front bearing to the proper position. If the gear shaft moves, please adjust the M10 screw behind the bearing frame to the proper position, adjust the gap so that the bearing does not make a noise, and the hand-turned pulley is properly tight. Too tight or too loose can cause damage to the machine.