Shrink packaging machine packaging method

The packaging method of the heat shrinkable packaging machine, the heat shrinkable film packaging machine is a small heat shrinkable packaging equipment carefully manufactured in accordance with international standards. It has the characteristics of simple operation, wide application range, good sealing performance, high transparency, low cost, and high grade. It is suitable for small and medium-sized Packaging of bulk products. Below, the editor of Zhengzhou shrink packaging machine will talk about the details of the packaging method of shrink packaging machine!

1. Open at both ends

The heat shrink packaging machine uses a cylindrical film or a flat film to wrap the packaged material in a sleeve and then perform the heat shrinking operation. After the packaging is completed, there is a shrinking opening at both ends of the package.

Two, four sides sealed

Wrap the product around with flat film or cylindrical film, and the seams are sealed by lap joints. Used for product packaging that requires sealing.

Three, one end open

Pallet shrink packaging is a typical example. First, the film is made into a big square bottom bag, and then the big bag is placed on the stacked commodity pallet from top to bottom, and then heat-shrinked. Place the pallet with the product on the conveyor belt and cover it with a shrink film bag; the conveyor belt will send it to the channel of the heat shrink packaging machine, and the shrink packaging will be completed after passing through the heat shrink channel. Its main feature is that the products can be firmly bundled in units of a certain amount, will not be loose during transportation, and can be stacked in the open.