Labeling machines are widely used in the packaging profession. The labeling function can achieve ±1mm labeling. The excellent performance makes the packaging profession full of praise. The labeling machine uses the diversified performance of the labeling machine, which not only saves the cost at the time of labeling, but also adapts to the development of various production environments. Following the different packaging products, labeling machines are also divided into various models and customized, labeling machine manufacturers to deal with the urgent needs of various occupations.

Of course, the labeling machine will inevitably have some minor problems or minor defects during use. Next, I will share with you some common problems summarized by intelligent engineers to eliminate common problems and solutions.

1. Deviation. Since the labeling machine has not been overhauled for a long time, we all know what to use to fix and adjust the gap of the labeling machine. Naturally, there will be errors: the label is off-track or unstable, the traction is slippery, and the packaging materials are not in place. When encountering this problem, pay attention to the righting of the label, make the label walk on the correct path, adjust the skewed point of view of the label, and realize the parallel label. In the production process of packaging materials, it is necessary to control the error of the edge orientation. As long as the quality of the material is ensured, the error problem can be thoroughly dealt with.

Heat shrink packaging machine

2. Break the record. This problem often occurs in the operation of the labeling machine, that is, the label is damaged during the towing process. In addition to replacing labels with good quality, pay attention to the scratches on the labels. Once a simple broken label appears, pay attention to the control. As long as the quality of the label is ensured, the labeling machine can operate better.

3. Bidding successively. When the labeling machine is working, it often encounters successive markings. The adjustment of the electric eye still cannot be processed, which is beyond the scope of application. At this time, we must pay attention to whether there is an error in the label, and the electric eye cannot detect the existence of the label. As long as the position is adjusted, the position can be detected.

In terms of traction speed, it should also be noted that the labeling speed and lower speed can be set on the control panel of the labeling machine, so that the labeling quality can be ensured and the speed can be adjusted. Finding and dealing with problems in time can effectively deal with minor defects in the labeling process.

* Name：

* Phone number：

Mailbox：

* Message content：

* Verification code：

Change one